AUTOMATIC DIE-CUTTING and HOT FOIL STAMPING MACHINES
Main features of machines:
Features of MHK series include:
1. CE approved
2. Center line system
3. Auto Non-stop collecting device
4. Human machine interface and PLC from Schneider
5. Overload protection torch limit controller
6. Timing belt driven system
7. Automatic forced lubrication system
8. Micro-adjustment of the feeding platform
9. Four side stripping unit
10. Wide stock range for corrugated board and card paper
11. Photoelectric device for safe operation
12. Automatic oil cooling device
13. Automatic lubrication device for main driven chains
14. High speed and precision feeder equipped
15. ISO9001 and CE approved manufacturing process.
16. European, Taiwan and Japanese standard spare parts
MHK-1050 Automatic die cutting machine
MHK-1050CE Automatic die cutting machine with double stripping (including front edge separation system)
MHK-1050 and MHK-1050CE Automatic Die Cutting Machines are used for paper box, paper carton, and label die-cutting, and embossing especially on all kinds of exquisite printing materials such as the wine box, cigarette box, gift box, and the household appliance box, cosmetics box to achieve 3D and exquisite, ect.
MHK-1050AT Automatic foil stamping and die cutting machine
Technical parameters:
| Model | MHK-1050 and MHK-1050CE |
| Max. sheet size | 1050X750(mm) |
| Min. sheet size | 400X360(mm) |
| Max. die cutting size | 1040X720(mm) |
| Min.gripper margin | 9-17mm |
| Inner chase size | 1080X745(mm) |
| Stock range | 80~600g/m2(Card paper) |
| Die cutting accuracy | ≤±0.1mm |
| Max. working pressure | 300ton |
| Max. working speed | 7500s/h |
| Max. paper feeding stacking height | 1600mm(including wooden pallet) |
| Max. paper collecting stacking height | 1400mm(including wooden pallet) |
| Main motor power | 11kw |
| Whole machine dimension | 6227mm(7225 mm model CE)×4593mm×2349mm
(length: including pre-feeding track)(width: including the pedal) |
| Total weight of machine | About 16t |
| Full-load wattage | 16kw |
MHK-1050ATC
MHK-1050 AT or ATC automatic Hot Foil stamping & Die Cutting Machine is used for box, label die-cutting, foil stamping and embossing, especially on all kinds of exquisite printing materials such as the wine box cigarette box, gift box, and the household appliance box, cosmetics box to achieve 3D and exquisite effect. MHK-1050ATC Automatic Hot Foil Stamping &Die Cutting Machine with stripping is equipped with stripping section based on MHK-1050AT, thus ensures multi-operational function, faster production and needs less manpower.
Technical parameters:
| Model | MHK-1050ATC |
| Max. sheet size | 1050×750mm |
| Min. sheet size | 400×360mm |
| Max. die cutting size | 1040×720mm |
| Max. hot stamping size | 1040×720mm |
| Gripper margin | 9-17mm |
| Inner chase size | 1080×745mm |
| Stock range | 80-2000gsm(cardboard) ≤4mm (corrugated) |
| Die cutting accuracy | ≤±0.1mm |
| Max. die cutting force | 600T |
| Max. die cutting speed | 7500s/h or 9000s/h die cutting |
| Max. feeder pile height | 1400mm(wooden pallet included) |
| Max. gold foil diameter | 250mm(vertical) |
| Electric-heated system | 20 temperature ranges, 40-180℃ is adjustable 20-1020mm |
| Foil width | 20-1020mm |
| Main motor wattage | 15kw |
| Overall dimension | 7100×4260×2350mm |
| Net weight approx | 20.5T |
| Full Load wattage | 56kw |
SM-1100/1400/1700/1900 paper cutting machine
SM- series cutters apply the advanced technology combined with the long experience and leading manufacturing techniques to build and launch a new generation of sheet paper reel sheeter equipment. This machine adopts double-helix design, the edge of cutting paper is smooth without crude or powder. Because of high cutting precision paper can be directly used on sheet-fed printing machines after cutting, which help to reduces the production cost and improve production efficiency.
Technical parameters:
| Model | SM-1100/1400/1700/1900 |
| Cutting type | Synchro- fly twin knife |
| Applicable range of paper | 120-1000GSM |
| Max. paper roll diameter | 1800mm(71”) |
| Max. paper-cutting width | 1100mm/1400/1700mm/1900mm |
| Range of cutting length | 450-1450mm(SM-1100)
450-1600mm(SM-1400/1700/1900) |
| Cutting sheet number | 2 sheet |
| Cutting precision | Cutting length 1000mm: ±0.2mm Cutting length>1000mm: ±0.1% |
| Max. cutting speed | 300 cut/min |
| Max. cutting meter speed | 300 m/min |
| Max. paper stacking height | 1300mm(SM-1100)1500mm(SM-1400/1700/1900) |
| Air pressure source requirement | 0.8Mpa |
| Design power | 380V/220V*50HZ |
| Gross weight | 12000/16000/18000/20000kgs |
CM-1100/1400/1700/1900 paper cutting machine
CM series sheeters are build using the advanced technology. The machine computer control system controls international top brand servo motor and AC transducer used in this machine. The conveyer belt make NITTA, Japan. The pneumatic vibrator make FINDEVA from Switzerland. The electrical system equipped with SCHNEIDER & OMRON. The speed of cutting paper is so fast and stable. German build precise bearings and cutting knife assure the high cutting precision. The touch-screen makes the operation easy. The anti-curve rack makes flat paper at delivery. This particular model is paper processing machine that is very popular in the paper converting and printing industry due to its cost efficiency and productivity.
Technical parameters:
| Model | CM1100A/1400A/1700A/1900A |
| Cutting type | The up knife cut reciprocally and the down knife is fixed |
| Applicable range of paper | 60-550GSM |
| Max. paper roll diameter | 1500mm(CM-1100A)/1800mm(CM-1400/1700/1900A) |
| Max. paper-cutting width | 1100mm/1400/1700mm/1900mm |
| Range of cutting length | 450-1450mm (CM-1100A)/450-1600mm (CM-1400/1700/1900A) |
| Cutting sheet number | 2 sheet |
| Cutting precision | Cutting length 1000mm: ±0.5mm
Cutting length>1000mm: ±0.1% |
| Max. cutting speed | 300 cut/min |
| Max. cutting meter speed | 300 m/min |
| Max. paper stacking height | 1500mm |
| Air pressure source requirement | 0.8Mpa |
| Design power | 380V/220V*50HZ |
| Gross weight | 9500/10500/12000/14000KGS |
◇Technical Parameters MHK-820/MHK-820CE
| Model | 820/MHK-820CE |
| Max. sheet size | 820X600(mm) |
| Min. sheet size | 310X260(mm) |
| Max. die cutting size | 800X580(mm) |
| Min.gripper margin | 9-17mm |
| Inner chase size | 910X610(mm) |
| Stock range | 80~2000g/㎡(Card paper)≦4mm(Thickness of corrugated paper) |
| Die cutting accuracy | ≤±0.1mm |
| Max. working pressure | 200ton |
| Max. working speed | 7000s/h |
| Max. paper feeding stacking height (including wooden pallet) | 1500mm |
| Main motor power | 11kw |
| Max. paper collecting stacking height (including wooden pallet) | 1300mm |
| Whole machine dimension | 5950mm×3730mm×2140mm(MHK-820)/7000mm×3730mm×2140mm(MHK-820CE) |
| Total weight of machine | 12ton(MHK-820)/13ton(MHK-820CE) |
| Full-load wattage | 16KW(MHK-820)/16.9KW(MHK-820CE) |
◇Technical Parameters MHK-820T
| Model | 820/MHK-820CE |
| Max. sheet size | 820X600(mm) |
| Min. sheet size | 310X260(mm) |
| Max. die cutting size | 800X580(mm) |
| Min.gripper margin | 9-17mm |
| Inner chase size | 910X610(mm) |
| Stock range | 80~2000g/㎡(Card paper)≦4mm(Thickness of corrugated paper) |
| Die cutting accuracy | ≤±0.1mm |
| Max. working pressure | 200ton |
| Max. working speed | 7500s/h |
| Max. paper feeding stacking height (including wooden pallet) | 1500mm |
| Main motor power | 11kw |
| Max. paper collecting stacking height (including wooden pallet) | 1300mm |
| Whole machine dimension | 7000mm×3730mm×2140mm(MHK-820T) |
| Max. gold foil diameter 250mm(Longitudinal) | 200mm(lateral) |
| Electric-heated system | 180℃ adjustable |
MANUAL DIE-CUTTING AND HOT FOIL STAMPING MACHINES
ML series manual die cutting and creasing machine ML manual die cutting and creasing machine is meant die cutting cardboard, corrugated boards, plastic materials, leather products etc. It is widely in printing, packing decorating, plastic and other industries.
Features:
Four-shaft bevel wheel structure with steady operation, precise cutting, low noise.
Air clutch for safety
45#carbon steel
Micro-adjustment gear device of high precision
IEC standard electrical system
Single die cutting, continuous die cutting, time delay, totally three die cutting ways
Infra-red protection
Lubrication system
+ chart from http://www.dayuan-machinery.com/products/showproduct.php?lang=en&id=40
TYMB Manual hot foil stamping and die cutting machine
TYMB hot foil stamping machine suits for gilding-printing by all kinds of colored electro-chemical aluminum foils, making samples, boxes, books, and greeting cards etc. It is optimal for printing, packaging, decoration and plastic industries for substrates like including paper and board, plastic, leather etc
| Model | Max. Platen Working Area(mm) | Working Pressure | Foil-delivered Length (mm) | Working Speed (Time/h) | Main Motor | Overall Power | Overall Dimensions | Total Weight (kg) |
| TYMB750 | 750×520 | 100T | 500 | 1380 | 2.2kw | 10kw | 2150x1400x1900mm | 2500 |
| TYMB930 | 930×670 | 170T | 640 | 1320 | 4kw | 13kw | 2200x2000x1950mm | 3500 |
| TYMB1040 | 1040×720 | 170T | 700 | 1320 | 4kw | 13kw | 2230x2100x2000mm | 4500 |
| TYMB1100 | 1100×800 | 220T | 800 | 1200 | 5.5kw | 19kw | 2250x2200x2000mm | 5000 |
| TYMB1200 | 1200 x820 | 220T | 800 | 1200 | 5.5kw | 19kw | 2250x2200x2050mm | 5500 |
| TYMB1300 | 1300×920 | 380T | 870 | 900 | 7.5kw | 32kw | 2500x2200x2450mm | 6500 |
| TYMB1400 | 1400×1000 | 380T | 950 | 900 | 7.5kw | 32kw | 2600x2200x2500mm | 7200 |
| TYMB1500 | 1500×1050 | 380T | 1000 | 900 | 7.5kw | 32kw | 2700x2200x2600mm | 8000 |
| TYMB1600 | 1600×1250 | 380T | 1200 | 900 | 11kw | 35.5kw | 2800x2200x2600mm | 12500 |
| TYMB1800 | 1800×1280 | 380T | 1300 | 900 | 11kw | 35.5kw | 2900x2200x2600mm | 12700 |