B60-Wash

Daily Blanket Wash for Automatic Blanket Cleaning Systems and for manual use.

• Good solvency power for a fast cleaning process
• with extended and very fast emulsion performance
• Corrosion inhibited – gentle to sensitive press parts
• flash point above 60°C
• very low rubber swelling effect – gentle to ink rollers and blankets
• water miscible – removes ink and paper dust
• free of aromatic solvents — safer working conditions
• very low odour
• density: 0,795
• Flash Point: > 60°C
• Aromatic Content: < 0,1%
• Color: clear
• Odour: mild aliphatic
• Water miscible: yes
• Evaporation: medium

UV Wash 60 

Daily UV Blanket and Roller Wash for Automatic Blanket Cleaning Systems and for manual use.

 Recommended for EPDM rollers and blankets.

• high solvency power for a fast cleaning process
• medium fast evaporation — without greasy residues
• flash point above 60°C
• very low rubber swelling effect – gentle to UV-ink rollers and UV-blankets
• water miscible – removes ink and paper dust
• low an mild odour
• only for UV Rollers and UV Blankets (EPDM)
• Density: 0,95
• Flash Point: > 60°C
• Aromatic Content: < 0,1%
• Color: clear
• Odour: mild
• Water miscible: yes
• Evaporation: medium
• Xi: Irritating

D.A.I. 95 Wash

Daily Alcohol Dampening Roller Cleaner and Rejuvenator — with hydrophilic additives 

• Good solvency power:
  to clean deeply and quick the dampening rollers, i.p. the ductor roller
• Gives back to the dampening rollers its former good water transfer ability
• Water miscible:
  to remove ink and paper residues in one step
• evaporates good and without greasy residues
• does not leave disturbing residues in the dampening system
• contains only aromatic-free solvents
• low odour and gentle to rollers
• Flash point above 26 °C — safer working conditions
• Density: 0,75 g/cm3
• Flash Point: 24°C
• Color: clear
• Odour: mild aliphatic
• Evaporation: medium-fast

How to use:

Apply D.A.I. 95 Wash onto a clean rag and wash dampening ductor roller manually. use on daaily base or on request    

Gummi Fit

Cleaner and Rejuvenator for Offset Blankets — conventional and UV, Cleaner and Activator for rubber surfaces, feeder rollers, folding machines, etc.

• Very high solvency power
  Removes also stubborn residues and glaze
• Rejuvenating additives:
  give back to the blanket its former smooth surface
• Free of aromatic solvents and other hazardous solvents:
  for better working conditions
• Low odour and high flash point (above 21°C)
• Good evaporation rate without greasy residues
• Gentle to the rubber — very low swelling effect
• does not leave sticky a surface on blankets
• Density: 0,83 g/cm3
• Flash Point: 28°C
• Color: clear
• Odour: mild aliphatic
• Evaporation: medium

How to use:

Apply Gummi Fit evenly onto the blanket, let penetrate ca.. 5-10 seconds and wipe away dissolved residues.

Clean and activate rubber surfaces, feeder rollers, rollers in folding machines gently with a rag soaked with Gummi Fit.

CIP-1-2-3 | CIP-Jumbo 

Correction Pens – Deletion – for Positive Plates and CtP Thermo Plates

• Quick and thoroughly:
  deletes/removes all coating residues
• Very gentle correction:
  does not attack the oxide surface
• No dry up of the solution:
  long lasting
• Very precise:
  also difficult corrections possible

How to use:

Apply gentle deletion/correction fluid onto the area to be corrected, let soak several seconds and then remove residues with a wet sponge