B60-Wash
Daily Blanket Wash for Automatic Blanket Cleaning Systems and for manual use.
Good solvency power for a fast cleaning process
with extended and very fast emulsion performance
Corrosion inhibited – gentle to sensitive press parts
flash point above 60°C
very low rubber swelling effect – gentle to ink rollers and blankets
water miscible – removes ink and paper dust
free of aromatic solvents — safer working conditions
very low odour
density: 0,795
Flash Point: > 60°C
Aromatic Content: < 0,1%
Color: clear
Odour: mild aliphatic
Water miscible: yes
Evaporation: medium
UV Wash 60
Daily UV Blanket and Roller Wash for Automatic Blanket Cleaning Systems and for manual use. Recommended for EPDM rollers and blankets.
high solvency power for a fast cleaning process
medium fast evaporation — without greasy residues
flash point above 60°C
very low rubber swelling effect – gentle to UV-ink rollers and UV-blankets
water miscible – removes ink and paper dust
low an mild odour
only for UV Rollers and UV Blankets (EPDM)
Density: 0,95
Flash Point: > 60°C
Aromatic Content: < 0,1%
Color: clear
Odour: mild
Water miscible: yes
Evaporation: medium
Xi: Irritating
D.A.I. 95 Wash
Daily Alcohol Dampening Roller Cleaner and Rejuvenator — with hydrophilic additives
Good solvency power:
to clean deeply and quick the dampening rollers, i.p. the ductor roller
Gives back to the dampening rollers its former good water transfer ability
Water miscible:
to remove ink and paper residues in one step
evaporates good and without greasy residues
does not leave disturbing residues in the dampening system
contains only aromatic-free solvents
low odour and gentle to rollers
Flash point above 26 °C — safer working conditions
Density: 0,75 g/cm3
Flash Point: 24°C
Color: clear
Odour: mild aliphatic
Evaporation: medium-fast
How to use:
Apply D.A.I. 95 Wash onto a clean rag and wash dampening ductor roller manually. use on daaily base or on request
Gummi Fit
Cleaner and Rejuvenator for Offset Blankets — conventional and UV, Cleaner and Activator for rubber surfaces, feeder rollers, folding machines, etc.
Very high solvency power
Removes also stubborn residues and glaze
Rejuvenating additives:
give back to the blanket its former smooth surface
Free of aromatic solvents and other hazardous solvents:
for better working conditions
Low odour and high flash point (above 21°C)
Good evaporation rate without greasy residues
Gentle to the rubber — very low swelling effect
does not leave sticky a surface on blankets
Density: 0,83 g/cm3
Flash Point: 28°C
Color: clear
Odour: mild aliphatic
Evaporation: medium
How to use:
Apply Gummi Fit evenly onto the blanket, let penetrate ca.. 5-10 seconds and wipe away dissolved residues.
Clean and activate rubber surfaces, feeder rollers, rollers in folding machines gently with a rag soaked with Gummi Fit
CIP-1-2-3 | CIP-Jumbo
Correction Pens – Deletion – for Positive Plates and CtP Thermo Plates
Quick and thoroughly:
deletes/removes all coating residues
Very gentle correction:
does not attack the oxide surface
No dry up of the solution:
long lasting
Very precise:
also difficult corrections possible
How to use:
Apply gentle deletion/correction fluid onto the area to be corrected, let soak several seconds and then remove residues with a wet sponge