XL SERIES Automatic High Speed Intelligent 4-6 corner Folder Gluer
| XL series | 650XL | 800XL | 1100XL |
| Machine Dimensions | 2100mm x 1900mm | 2500mm x 2100mm | 2800mm x 1900mm |
| Carton board max. | 650 MM | 800 MM | 1100 MM |
| Corrugated flute type | A,B,E | A,B,E | A,B,E |
| Speed max. | 400 m/min | 400 m/min | 400 m/min |
| Inching speed | 10 m/min | 10 m/min | 10 m/min |
| Thickness of folded box max. | 12 mm | 20 mm | 20 mm |
| Blank width | 650 mm | 800 mm | 1100 mm |
| Total power | 31 kW | 38.2 kW | 38.2 kW |
| Electrical connected load | 22.5 kW | 25.5 kW | 29 kW |
| Compressed air | 6 bar | 6 bar | 6 bar |
| Air compressor capacity | 10 m³/h | 10 m³/h | 10 m³/h |
| Air tank capacity | 60 L | 60 L | 60 L |
| Length*Width*Height | 16*1.55*1.65m | 18 *1.7*1.65m | 18*2*1.65m |
| Net Weight | 8T | 9T | 11 T |
 |
Paper Feeding Section Rail width can be horizontally adjusted and set by seven pieces 30mm thickened feeding belt and10mmmetalboard.Operators can operate feeder switch in any direction. Embossing drive wheel guide the feeding section belt, side feed gates in the right and left are adjustable according to the products.Vibration device coordinate with motor which helps machine consecutive and automatic feeding quick and simply. Feeder section can stack 400MM height paper board. Independently motorized servo motor control, simultaneous feeding mode with the main motor.Feeder section equipped with three pieces feeding knife, adjust the asymmetrical lengths as per the box sample. |
 |
Aligner section The paper board sent from feeder section will be corrected by aligner section to ensure transmission accurately.Pressing drive pressure can be adjusted up and down to accommodate different paper board thickness. |
 |
Pre-folding section Special first folding line pre-fold 180°. third line 165° which perfectly meets the requirements of automatic packaging industry. |
 |
Climbing Section Besides the faster speed, precise and running more steady. It is also much easier to adjust machine comparing with traditional folder gluer. |
 |
Lower gluing tank lower gluing tank with large volume. Easy to remove and clean. Electronic upper gluing system by guns. |
| Folding and closing The Second and fourth folding line 180°
Folding and closing section transmit from right and left side, the belt speed can |
 |
| Trombone section Up and down belt can be adjusted separately.
Equipped with photo-electronic counting device and kicking paper device, which can press the paper after accounting and make it easy to pack . Also equipped with feeding paper inspection device. |
 |
| Delivery Equipped with special additional sponge belt for pressing.
Upper section moves back and forward, allowing different box length. |
 |
 |
4 and 6-corner device Motorized and untimed electronic back folding system with intelligent servo motor technology. |
Memory function  |
 |
| When setting a job, board of machine have it’s own position. Controlled by servo driver, the memory control system worked by saving data of positioning improving the efficiency and precision of box forming. | |
Straight-line box
Samples Parameters
| Model | 650Type | 800Type | 1100Type | |
| A | 75-650 | 75-800 | 75-1100 | |
| B | 60-650 | 60-800 | 60-800 | |
| C(Min) | 35 | 35 | 35 |
Crash lock bottom box
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 90-900 | 90-900 | 90-900 | |
| C(Min) | 20 | 20 | 20 | |
| D(Min) | 30 | 30 | 30 | |
| E(Min) | 40 | 40 | 40 |
Tapered box
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 90-650 | 90-800 | 90-1100 | |
| C(Min) | 40 | 40 | 40 | |
| D(Min) | 35 | 35 | 30 | |
| E(Min) | 20 | 20 | 20 |
4 corners box
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 120-650 | 120-800 | 120-1000 | |
| C(Min) | 20-200 | 20-200 | 20-200 | |
| D(Min) | 90 | 90 | 90 | |
| E(Min) | 80 | 80 | 80 |
6 corners box
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 250-650 | 250-800 | 250-1100 | |
| C(Min) | 20-200 | 20-200 | 20-200 | |
| D(Min) | 90 | 90 | 90 | |
| E(Min) | 80 | 80 | 80 |
CS SERIES Automatic 4-6 corner Folder Gluer
| Model | 650CS | 800CS | 1100CS | |
| Carton board max. | 650 MM | 800 MM | 1100 MM | |
| Corrugated flute type | A,B,E | A,B,E | A,B,E | |
| Speed max. | 350 m/min | 350 m/min | 350 m/min | |
| Inching speed | 10 m/min | 10 m/min | 10 m/min | |
| Thickness of folded box max | 12 mm | 20 mm | 20 mm | |
| Blank width | 650 mm | 800 mm | 1100 mm | |
| Total Power | 22.5 kW | 23.5 kW | 23.7 kW | |
| Compressed air | 6 bar | 6 bar | 6 bar | |
| Air compressor capacity | 10 m³/h | 10 m³/h | 10 m³/h | |
| Air tank capacity | 60 L | 60 L | 60 L | |
| Net Weight | 5T | 6.6T | 6.8 T | |
| Length*Width*Height | 13*1.4*1.8m | 16.5 *1.4*1.8m | 16.5*1.7*1.9m |
CS Features introduction
 |
Paper Feeding Section Rail width can be horizontally adjusted and set by seven pieces 30mm thickened feeding belt and 10mm metal board.Operators can operate feeder switch in any direction. |
| Independently motorized motor control, simultaneous feeding mode with the main motor.Feeder section equipped with three feeding knives, adjust the asymmetrical lengths as per the box sample. |
Embossing drive wheel guide the feeding section belt, side feed gates in the right and left are adjustable according to the products.Vibration device coordinates with motor which helps machine consecutive and automatic feeding quick and simply. Feeder section can stack 400mm heigh paper board. |
 |
Aligner section The paper board sent from feeder section will be corrected by aligner section to ensure guiding accurately. Pressing drive pressure can be adjusted up and down to accommodate different paper board thicknesses. |
| Pre-folding section Special first folding line pre-fold 180°. third line 165° ,which perfectly meets the requirements of automatic packaging industry. |  |
| Lower gluing tank lower gluing tank with large volume. Easy to remove and clean. Electronic upper gluing system by guns. |  |
| Folding and closing The Second and fourth folding line 180°
Folding and closing section transmit from right and left side ,the |
 |
| Trombone Section Up and down belt can be adjusted separately.
Equipped with photo electronic counting device and kicking paper |
 |
| Delivery Equipped with special additional sponge belt for pressing of boxes. Upper section moves back and forward, allowing different box length. |  |
| 4 and 6-corner device Motorized and untimed electronic folding system with intelligent servo motor technology. |  |
Box type and size:
| Model | 650Type | 800Type | 1100Type | |
| A | 75-650 | 75-800 | 75-1100 | |
| B | 60-650 | 60-800 | 60-800 | |
| C(Min) | 35 | 35 | 35 |
Crash lock bottom box:
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 90-900 | 90-900 | 90-900 | |
| C(Min) | 20 | 20 | 20 | |
| D(Min) | 30 | 30 | 30 | |
| E(Min) | 40 | 40 | 40 |
Tapered box:
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 90-650 | 90-800 | 90-1100 | |
| C(Min) | 40 | 40 | 40 | |
| D(Min) | 35 | 35 | 30 | |
| E(Min) | 20 | 20 | 20 |
4 corners box:
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 120-650 | 120-800 | 120-1000 | |
| C(Min) | 20-200 | 20-200 | 20-200 | |
| D(Min) | 90 | 90 | 90 | |
| E(Min) | 80 | 80 | 80 |
6 corners box:
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 250-650 | 250-800 | 250-1100 | |
| C(Min) | 20-200 | 20-200 | 20-200 | |
| D(Min) | 90 | 90 | 90 | |
| E(Min) | 80 | 80 | 80 |
AS SERIES Automatic Bottom Lock Folder Gluer (three points)
AS Parameters
| Model | 650AS | 800AS | 1100AS |
| Paper Material | Cardboard210-800g, E Corrugated | Cardboard210-800g, E Corrugated | Cardboard210-800g, E Corrugated |
| Max. Liner speed | Max. 260 meter/minute | Max. 260 meter/minute | Max. 260 meter/minute |
| Feeding way | Automatically and continuously feeding | Automatically and continuously feeding | Automatically and continuously feeding |
| Way of folding | Fold 1 and fold 3 are 180° and 135° Fold 2 and fold 4 are 180° Bottom folded and glued |
Fold 1 and fold 3 are 180° and 135° Fold 2 and fold 4 are 180° Bottom folded and glued |
Fold 1 and fold 3 are 180° and 135° Fold 2 and fold 4 are 180° Bottom folded and glued |
| Glue Material | Water-base cold glue | Water-base cold glue | Water-base cold glue |
| Total Power | 11.2 kw | 11.2 kw | 11.2 kw |
| Weight | 4T | 4.5T | 5T |
| Over dimension | 13×1.3×1.45m | 13×1.45×1.45m | 13×1.8×1.45m |
AS Features introduction
 |
Paper Feeding Section 6pcs Adjustable feeding belts to ensure easy adjustment, stable and smoothly feeding. Continuously variable speed to ensure feeding and stable transfer. One-touch Pneumatic knife, easy to adjust feeding belts. |
 |
Aligner section Equipped with auto-correction device to ensure the correct feeding. |
 |
Pre-folding Section Double-board structure with a set of pre-folding knives.
Pre-fold angle is 180°and 135°, especially suitable for small |
 |
Lock bottom Section board tracking structure, upper gluer can make bottom-locked box automatic gluing and forming.The entire bottom-lock part is installed in a reversible bracket, substantially reduce the swap adjustment time of bottom-fold box and the other types of box. |
| Lower gluing tank |  |
| Folding and closing The folding is equipped with the driving belt, folding belts have corrective function, making box forming more stable. |  |
| Trombone section Adjusts the pressure easily and reliably to ensure the gluing quality. Equipped with pneumatic counting device which makes the counting convenient. The press is equipped with independent speed adjustment. |  |
| Delivery Pressing: Equipped with one-touch pneumatic pressure adjustment, easy operation. Press has two functions:
1.Waiting, when feeding is paused, press will go into waiting state 2.Travel switch, pauses the machine in case of wrong collecting. |
 |
Straight-line box:
| Model | 650Type | 800Type | 1100Type | |
| A | 90-650 | 90-800 | 120-1100 | |
| B | 60-800 | 60-800 | 60-800 | |
| C(Min) | 35 | 35 | 35 |
Crash lock bottom box
| Model | 650Type | 800Type | 1100Type | |
| A | 160-650 | 160-800 | 160-1100 | |
| B | 90-900 | 90-900 | 90-900 | |
| C(Min) | 20 | 20 | 20 | |
| D(Min) | 35 | 35 | 35 | |
| E(Min) | 100 | 100 | 100 |
GK-A Automatic folder gluer
| Model | GK-650A | GK-780A |
| Paper Material | Cardboard210-800g | Cardboard210-800g |
| Max. Liner speed | Max. 220 meter/minute | Max. 220 meter/minute |
| Feeding way | Automatically and continuously feeding | Automatically and continuously feeding |
| Way of folding | Fold 1 and fold 3 are 180°, | Fold 1 and fold 3 are 180°, |
| Glue Material | Water-base cold glue | Water-base cold glue |
| Total Power | 2.5kw 380v | 2.5kw 380v |
| Weight | 1.6T | 1.8T |
| Over dimension | 6.5×1.3×1.45m | 6.5×1.45×1.45m |
| Packaging dimensions | 3.65*1.3*1.45m, 2.85*0.85*0.9m | 3.65*1.45*1.45m, 2.85*0.95*0.9m |
| Container | 20GP | 20GP |
| Net weight | 1050kg, 350kg | 1220kg, 470kg |
| Gross weight | 1250kg, 420kg | 1420kg, 530kg |
Features introduction
 |
Feeding 5 adjustable feeding belts to ensure easy adjustment, stable and smoothly feeding. Continuously variable Speed to ensure feeding. One-touch Pneumatic knife, easy for the adjustment of feeding belts. |
| Folding Lengthened folding to avoid the unevenness while rapidly forming of Boxes and make it perfect. |
 |
 |
Full pressing 2-board structure Two modes for pressing belt speeding:
Auto: set distance between boxes, pressing belt speed is the Manual: pressing belt conveys in a fixed speed and machine speed With counting device to count the finished boxes to match with boxes |
| Delivery Equipped with feeding paper inspection device.
Equipped with impacting device to press the paper
|
Samples
| Model | 650Type | 780Type |
| A | 75-650 | 75-780 |
| B | 60-650 | 60-780 |
| C(Min) | 35 | 35 |
Accessories For Folder Gluers
4 Channels Nozzle Cold Glue System
KQ cold glue system has the characteristics of high efficiency, flexibility, good stability and easy maintenance.
Application Field
For carton boxes, four or six corner boxes, hamgurger boxes, file bags, introductions, envelopes and other paper products.
 |
High efficiency controller Modular control and monitor function, fully visualized operation through a central touch screen for flexibility and to ensure straightforward operation. |
Model | HZ4 |
| Input Voltage | 220VAC（±20%）50-60HZ | ||
| Power | 480W | ||
| Glue Precision | ±1mm | ||
| Size | 280*233*183mm | ||
| Spray Head Quantity | Optional,up to 4 | ||
| Photocell Quantity | Optional,up to 4 | ||
| Weight | 7.8kg | ||
 |
Application of piston pump 1:6 high pressure piston pump connected to controller. Equipped with automatic voltage regulator to ensure precise glue application. |
Model | HB6 |
| Maximum Viscosity of glue | 3000mPas | ||
| Transport Efficiency per Two-pass | 80cm3 | ||
| Input Air pressure | 6:1 | ||
| Weight | 12.5kg | ||
| Size | 485*225*150 | ||
 |
Cost Contral Precision in ± mm at the speed of 300m/min |
Model | PJ-4000 |
| Size | 51.5*25*127 | ||
| Maximum Air Pressure | 32bar | ||
| Maximun Frquency | 500Hz | ||
Plasma device
Innovative technologies for surface activation and coating
 |
|
| To ensure a firm bond, the surface of the product requires excellent adhesion to achieve the desired results. Plasma surface treatment can help the surface of material gain new properties on speed 40min/m to increase the standard cold glue sticking ablilty. |  |
 |
|
Originated from German technology been used and tested on mobile, glass, plastic, bottle labeling, EPDM, carton boxes, cable industries etc for many years.
 |
Model | HP30A Direct Injection Nozzle |
| Nozzle Quantity | 3 | |
| Processing Width | 6-10mm*3 | |
| INput Power | AC220V | |
| Input Air Pressure | 0.4-0.6Mba | |
| Total Power | 800VA*3 | |
| Weigh | 60kg | |
| Size | 600(W)*400(L)*1000(H) |
Double-sided tape application head
Innovative double-sided adhesive technology, can be adapted to most of the models of double-sided tape.
Delivery
High-precision counting electric eye to implement electronic counting mode, to facilitate the production counting and packing.
GK-450 Automatic Small Box Stacker
Stacker is a kind of unique multi-purpose tool that can be used to folding the carton, and to make the packaging more easy on high speeds. Its operation is simple and humanized design can use for almost all types of carton packaging.
| Box size range (Min.~Max.) | 60x90mm~450*200 mm |
| Machine dimension | 2100*2000 mm |
| weight | 500KG |
| voltage | 220V/50HZ |
| power | 12KW |
Automatic receive box machine to transfer the box from folder gluer by belt to structure, direction of stacking cartons of stereoscopic turn of 90 degrees, so the paper boxes stacked way many convenient than flat out stack. Only two person can cope with folder gluer folded box at a speed of 200 meters / min, which greatly improves the work efficiency, and also reduces the labor intensity.
Main technical parameters
| Model | GK-450 |
| The biggest size box | 450*200mm |
| Machine dimension | 2100*2000mm |
| Weight | 500KG |
| Voltage | 220V/50Hz |
| Power | 1.2KW |
Bar Code System
Efficient control technology can compare and distinguish color code, drug code, EAN and QR code to provide reliable quality assurance.
 |
Bar Code Detection without cumbersome setup work. Equipped with 8-inch high quality touch screen, English display.Easy to operate. |
 |
High Quality Controller shows the bar code, production speed, throughput ,and number of defective items. Display and record the last ten incorrect product information for traceability. For faulty product alarms and shutdown. |
Application Field
MrcroPDF code, PDF417 code, RSS code, 39 code, Codabar code, 128 code, Cross 2 / 5code, 93 code, UPC / EAN code, medicine drug code.
 |
Model | Bar code reader |
| Speed | 1000 times/s | |
| Minimum Resolution | 0.125mm | |
| Detection Distance | 65-500mm | |
| Scanning Angle | 0-70 degrees | |
| Bar Code FOrm | atandard | |
| Line Barcode | All standards |